General Finishes Milk Paint

General Finishes Milk Paint

GF

  • $27.00


Colors: Snow White, Antique White, Linen, Millstone, Dark Chocolate, Seagull Gray, Driftwood, Queenstown Gray, Lamp Black, Buttermilk Yellow, Somerset Gold, Sunglow, Basil, Patina Green, Lime Green, Emerald, Coral Crush, Persimmon, Holiday Red, Brick Red, Tuscan Red, Persian Blue, Halcyon Blue, Klein Blue, Coastal Blue, Royal Purple Water or Oil: Water Based Ambers: No Interior/Exterior: Interior and Exterior Sheen: Flat Primer Required: Sometimes -Primer is recommended when applying a white or light colored paint over dark surfaces, when applying paint to existing finishes and wood species that are known to bleed (ex: oak), and when applying paint over laminate, veneer or metal. -White pigmented shellac based stain blocking primer is required to block the yellow stain produced by tannin bleed-through from the wood. GF's Stain Blocker is engineered to prevent the most persistent bleed-through. -As always, test your entire procedure (preparation through to topcoat, if you are using topcoat) for adherence and aesthetics on a hidden area of your project before beginning. Can Sizes: Pints, Quarts, *Gallons, *5 Gallon Pails *Gallons: Antique White, Basil, Coastal Blue, Dark Chocolate, Driftwood, Lamp Black, Linen, Millstone, Queenstown Gray, Seagull Gray, Snow White, Tuscan Red only *5 Gallon Pails: Snow White, Lamp Black and Antique White only Coats (#): 1+ coat Coverage: 150 sq.ft/quart, 600 sq. ft/gal Viscosity: 2000-3000 cPs Application Method: Brush, Roll or Spray Sprayable: Yes Spray Tip Sizes: HVLP-- .043-.051 Medium Air Cap Thinning: To thin, add 10-15% GF Extender or distilled water. GF Milk Paint can be sprayed without thinning. Dry Time to Touch: 30 min. Dry Time to Re-coat: 2 hrs. Dry Time Before Light Use: 7-10 days Dry Time Until Cured: 21 days Dry times are estimated based off ideal conditions (70*F 21*C, 70% humidity). Cool temperatures and high humidity can prolong dry time up to 8-10 hours. Topcoat Required: Optional GF Milk Paint does not require topcoat on low to medium wear surfaces. On high use surfaces like kitchen cabinets and table tops, add 3 coats High Performance. Topcoat Recommended: High Performance or Flat Out Flat. Seal high-use surfaces and dark colors with High Performance. VOC: Low <53 g/L - High <93 g/L